7.5 or 11 Inches? A Slim Alabaster Wall Sconce Size Guide

Direct answer: Both listed sizes share a 2.1-inch width, so the practical choice is the 7.5- or 11.0-inch height. Measure the real wall, use the exact video only for visible Natural Brass and alabaster evidence, and confirm every unresolved technical field before ordering.

1. Start with the verified size difference

The live listing gives Small at 54 millimeters in diameter by 190 millimeters high, or 2.1 by 7.5 inches. Large is listed at the same 54-millimeter, 2.1-inch diameter and a 280-millimeter, 11.0-inch height. The width is therefore not the deciding variable in this comparison; the practical difference is 3.5 inches of added vertical length.

Treat those numbers as product dimensions, not a complete installation drawing. The current evidence does not verify the backplate dimensions, the relationship between the wall box and fixture center, mounting hardware, junction-box compatibility, or required clearances. The first useful step is to mark both listed heights on the actual wall.

2. Use the exact video for visible evidence only

The exact Shopify product video shows the Natural Brass version in a room, including full fixture views, close detail, and a visible change from unlit to illuminated. It supports a visual inspection of the slim cylinder form, the brass-colored body, the alabaster ends, and the general relationship between the fixture and a nearby cabinet.

The video does not identify whether the filmed unit is Small or Large. It also cannot establish exact scale from the screen, an order-specific stone pattern, numeric color temperature, lumen output, CRI, beam distribution, dimming, or room coverage. Do not choose the size by estimating the footage; compare the listing dimensions with physical wall marks.

3. Read material and finish as separate variants

For Natural Brass, the listing identifies solid brass and alabaster. For Matte Black, it identifies stainless steel and alabaster. That is a material difference as well as a finish difference, so the two options should not be described as the same metal with different paint. The video shows Natural Brass only; it is not visual proof of the Matte Black option.

Alabaster is visible as a softly patterned material in the current media, but one photograph cannot guarantee the exact markings of another unit. When finish matching is important, request current-order confirmation and compare it with the nearby hardware, wall color, wood tone, and other fixed metals in the room.

4. Measure the real wall as a composition

Mark a 7.5-inch and an 11.0-inch vertical line at the proposed location. Step back to the main seated and standing viewpoints. Check the distance to artwork, mirrors, trim, shelves, curtains, doors, headboards, and furniture. A taller fixture may feel more architectural, but that is a design judgment—not a verified rule for this product or room.

Keep the shared 2.1-inch listed width in the mock-up, then add a separate placeholder for the unknown backplate and wall-box relationship. If two sconces will flank a bed, mirror, or artwork, mark both locations together. Symmetry, sightlines, reachable switches, and the center point can matter as much as the fixture height.

5. Confirm the electrical and installation brief

The listing uses the terms LED G4 and warm light, but the evidence reviewed here does not verify voltage, frequency, wattage, driver, replaceability, included light source, switching, numeric color temperature, output, CRI, or dimming. Request those fields for the exact destination and intended control system before an installer or buyer commits.

Also confirm fixture weight, mounting hardware, junction-box compatibility, wiring method, location rating, certification, service access, and local installation requirements. A styled image and a clean product video cannot answer those questions. A qualified installer should review the written specification, measured site, wall construction, and local requirements before work begins.